Bladder scanner is a medical device with high performance combined with B-mode ultra-modern technology and computer technology. The device consists of host and probe, it can speedily complete the detection of bladder area through scan of probe connected with the device, and transmit B ultrasound echo signal detected to embedded computer system after processing before computer identify the edge of image, volume calculation, and display relative information through LCD or built-in printer before achieve the examination of patient bladder and give you an effective comment in time during patient bladder treatment.

With ultrasound echo technology, Bladder Scanner is specially used for measurement of bladder volume. It consists of data processing and ultrasonic probe. The display used color TFT LCD with 600×480 Pixel, its measured result can be printout with thermal printer and also can be stored in the built-in flash-disk. The measured record stored in flash-disk can be sent to the computer through USB interface. The power for the device comes from battery.

 Product Feature:  
-Light weight, easy to carry 
-8.0 inch TFT color LCD big screen 
-Friendly software interface
-Simple operation flow 
-Powerful functions
-Can store and review image and data of patients
-A mass storage volume 
-Measurement data accurate 
-The USB interface, can send measure report uploaded to the PC or Internet 
-External printers, print directly measured results 
-System operating software can upgrade through internet
-Lithium battery inside, ensure anytime use 
-Never need calibration and never need pay more fee after buy

Character:  precision、safety、operating easily
·Eximious accuracy (double scan module) 
·Bladder position advance scan system
·Display bladder figure
·Easy to master,simple three operation steps
·On the safe side, the technology validating repeatedly
·Compute the bladder capability  automatically(milliliter reading)
·Display realtime bladder image and position in-phase 
·Configure USB interface

The application area of portable bladder ultrasound scanner
-It is widely used in hospital：
·surgery
·hocus section
·ICU
·urine section
·women and lay section
·orthopedics
·nerve medicine
·child section
·healing section
-PBS’s latent application area
appertain area
·Uric incontinence guide 
·SCI/MS
·Mentality healing institution
·Resthome
Family tend
·SCI/MS
·Community medical center
·Family、community doctor

Specification:
1. Transducer freq: 2.6MHZ
2. Scan method: Mechanical scan
3. Sway angle:  120°±2° 
4. Rotating angle: 180°±2° 
5. Scan depth: ≥140 mm；
6. Display screen: 8.0” TFT color LCD；
7. Power supply for the device: internal battery 
8. Battery control: capacity instruction and alarm for lower power
9. Recharge device: 
   Power adapter:
   Input voltage: ～220V±10%；
   Charger: 
   Output voltage：8.4V±0.1V
10.USB interface: for saving data and upgrade software；
11. Serial interface: for printer
12. Printer: for printing micro characters, graphic and image
13. Screen display: 6 pieces of cross-section ultrasound image, measurement result, real-time date, time and hospital name. 
14. Patient case record: 100 pieces 
15. Patient ID： 12 digits
16. Max. measurement:  999ml；
17. Measurement difference: V±25%（ when volume value V≤150ml），
                            V±15%（when volume value 150ml≤V≤999ml）；
18. Measurement methods: After pre-scan, the measurement will be automatically down after press “scan” key for one time.
19. Selection of measurement location: A directive for detection of location will guide you to the object zone before effective measurement while you make measurement.
20. Gender: male and female
21. Language of interface: English
22. Dimension: 300×210×50m(scanner), 320×180×65mm(box)
23. Weight: 1.8 Kg(net), 2.5Kg(total)